Pajico 403366 Hoshizuku Gloss, 1.1 oz (30 g), Pajico with Flocking Tip and Nozzle

Features: A smooth resin liquid with low viscosity. Hard finish resists scratches. Can be coated with a thin coating. Low unpleasant smell unique to resin. Fast curing No sticky residue after curing. After curing, it will not yellow over time. Beautiful finish even with dipping paint (dobble). Includes a flocking tip that is difficult to get uneven brushstrokes and is easy to paint details. Comes with a nozzle, so you can use it to remove small amounts. Resin changes may occur due to deterioration over time. Resin solution for thin coatings. Not for use on thick projects. Curing Time: UV-LED light (6W - 10W) 30 seconds - 2 minutes. UV light (36W) 2-4 minutes. Sunlight (sunny days): 30 seconds to 2 minutes. Sunlight (cloudy weather): 3 - 10 minutes. Hardening time varies depending on the working environment. [Note] When hardening, it becomes high temperature. Do not touch until heat cools. Please be careful not to get resin on your skin, clothing, furniture, etc. while working. Coating solution for thin coatings. Not for use on thick projects. ・This product will gradually react to hardening even on fluorescent lamps in a room or in the shade of a window. Please be careful not to leave this product in an open position for a long time. We recommend wearing gloves or glasses for those with sensitive skin or working in an environment where attention is required. While hardening, white gasses may appear on rare occasions. This is a part of the resin component that is vaporized by hardened heat. Although it is not particularly harmful to you, please make sure to ventilate as normal. When applied to a moon drop of UV-LED resin, the film may peel off due to the surface hardness of the moon drop. It is recommended that you use a #600 to #1000 sander to scratch the surface before applying. How to Use: When coated with flocking chips 1. Cut the flocking tip at 0.8 inches (20 mm) from the bottom with a nipper. 2. Open the cap and insert the tip 1. If the resin is adhered to it, wipe it gently with tissue. 3. Can be coated as is. When you finish using it, you can close the cap and reuse it. How to clean your flocking chips: Use the flocking chip without attaching to the cap, and when cleaning, please wipe thoroughly with alcohol type wet tissue. [Coating for Flocking Chips] Fine details. Lightly painted on the sides. When attaching the nozzle and applying it to a coating. Method 1. Remove a small amount from the nozzle → Flocking tip. 1. Remove the cap and replace it with the included nozzle. 2. A small amount of coating resin can be removed from the nozzle and then stretched thin with the flocking chip. Method 2. Extract the nozzle to a toning palette → dipping. 1. Replace the nozzle and give the appropriate amount of coating resin to the toning palette. Hold the resin hardened with a yatco or other similar to dip into the resin that is released. 2. Twist the resin throughout and move it forward, left and right. 3. Remove excess resin, light and harden. Coating for the nozzle: You can pour small amounts of resin directly and then apply thin paint with flocking chips. Distributing to a toning palette → dipping.

• Resin liquid for coating
• Product size: φ1.1 x H4.5 inches (28 x 116 mm); Capacity: 1.1 oz (30 g); Contents: 1.1 oz (30 g) gloss, 1 nozzle x 1, flocking tip x 3 pieces
• Ingredients: Acrylic photocurized resin
• Country of Manufacture: Japan
• It hardens quickly, has a hard finish, and is not sticky after curing. Gloss type for glass clarity and shine